Most Cleveland homeowners don’t think much about their driveways until they start looking rough, and by then, the salt damage, freeze-thaw cracking, and oil buildup have already been quietly doing their work for years. Northeast Ohio winters are hard on concrete. The repeated cycle of moisture soaking into the surface, freezing, and expanding is one of the main reasons driveways here deteriorate faster than in milder climates. Add the deicers that come with every major snowfall, and you’ve got a surface that ages quickly without the right care.
At Devins Powerwash, we’ve built our reputation serving homeowners across Cleveland and the surrounding suburbs, and driveway cleaning is one of the most satisfying services we offer, mostly because the results are immediate and obvious. We don’t just blast the surface and call it done. After a thorough cleaning, we can apply a Sherwin-Williams water-based sealer that protects the concrete for up to two years, leaves a clear-coat finish, and creates a visible beading effect so you can actually see the protection working. Water rolls off rather than soaking in, and the surface retains its clean appearance for much longer. That combination is why so many of our customers come back year after year.
If your driveway is due for a cleaning, or if you’ve been wondering whether sealing is worth it, reach out, and we’ll give you a straight answer. We offer free estimates and are happy to walk you through exactly what we’d recommend for your driveway before any work begins.
Concrete sealing is an additional cost beyond the driveway cleaning itself, and it’s never applied without your approval. Before any work begins, we review your driveway using satellite imagery to measure the size and scope of the surface. Your quote is based primarily on the overall size and length of the driveway, which gives us the most accurate basis for pricing without requiring a separate in-person visit just to generate a number.
Because sealing is offered as an add-on to driveway cleaning, it follows the same process: you receive a quote, you review it, and sealing only goes forward once you’ve accepted the bid. You will never come outside to find the sealer already applied and a charge on your invoice you didn’t agree to. That approval step is non-negotiable on our end. Pricing details are available upon request.
The factors that can affect your total include the size of the driveway surface and whether any additional prep work is needed before sealing expectations are addressed. Oil stains, for instance, are treated with a degreaser as a separate step, and the results on oil vary. We cover that in more detail in the process section below. For most standard concrete driveways in the Cleveland area, the quoting process is straightforward.
If you’re already scheduling driveway cleaning and want to add sealing, or if you’re combining multiple exterior services on the same property visit, that works to your advantage. Devins Powerwash may offer better overall pricing when multiple services are scheduled at the same property. The more we’re already doing at your home, the more efficient the job becomes for our crew, and we pass that benefit along in how we build the quote.
We use a water-based sealer sourced from Sherwin-Williams on every concrete driveway we seal. For homeowners who want to know what’s going on on their property, that’s a straight answer. You’re not getting a mystery product from an unknown supplier. Sherwin-Williams is a recognized name, and using a product from an established supplier gives you a reasonable basis for confidence in what’s being applied to your concrete.
The sealer we apply protects the driveway surface for up to two years. For Cleveland homeowners, that protection is more meaningful than it might sound in a warmer, drier climate. Your concrete is regularly exposed to freeze-thaw cycles in winter, snowmelt runoff, deicing salts, and moisture accumulation over multiple seasons. Sealing the surface after a professional cleaning gives it a fighting chance to maintain its condition during that exposure, rather than absorbing the full impact directly. Two years isn’t a permanent fix, but it extends the value of the cleaning and keeps the driveway in better shape heading into the next maintenance cycle.
Sealing is completed the same day as the driveway cleaning, after the concrete is fully cleaned and the add-on has been approved. That means one appointment rather than two, no gap between your clean driveway and the protection it needs, and no leaving the surface exposed while you wait for a follow-up visit. For most homeowners, being able to check off both services in a single visit makes it much easier to decide to add sealing. The driveway is already clean, the crew is already there, and the only thing left is the approval to move forward.
One of the most common questions we get from new customers is whether we’re insured and bonded. The answer is yes. We carry insurance and bonding, and those aren’t just selling points we throw out. They represent real protection for you as a homeowner when a crew is working on your property. Beyond the insurance coverage, our process is built around preventing surprises. Sealing requires your approval before it’s applied. Costs are quoted in advance. No work gets added to the scope without your sign-off.
We document every job with before-and-after photos. That’s standard practice on every driveway cleaning and sealing appointment, not something reserved for complicated jobs or commercial accounts. When the work is done, we walk the property and, when the homeowner is available, we do a walkthrough together before calling the job complete. If something doesn’t look right, we want to know about it before we leave, not after. That closeout process is how we keep customers confident in the results they’re paying for.
Honesty about stain results is a bigger differentiator than most companies make it out to be. We use a degreaser to treat oil on concrete driveways, and we work to remove as much as possible. Oil is never guaranteed to come out 100%, and we say that plainly before the job starts, not after. Rust and stain removals are separate from both driveway cleaning and sealing and are not included in the standard scope of either service. Knowing that upfront means you won’t be surprised when you look at the invoice, and it means we can have a realistic conversation about what the driveway will look like when the job is done.
The process starts when you contact us for a driveway cleaning quote. We review your driveway using satellite imagery, measuring the surface area and evaluating its size and length to build an accurate quote. You don’t need to walk the property with us or schedule a separate estimate visit for most jobs. Once we have the information we need, we put the quote together and present it to you for review. At that point, we’ll also offer concrete sealing as an optional add-on, so you can decide whether to have both services handled during the same visit.
Once you’ve reviewed and accepted the quote, we schedule the job. On the day of service, our crew calls ahead to let you know they’re on the way. The weather in Cleveland can affect exterior service scheduling, particularly during colder months and seasonal transitions. If conditions aren’t right for an exterior job, we’ll work with you to reschedule rather than push through a service that won’t hold properly. When conditions are right, and the job is on, you’ll know we’re coming before we arrive.
Our crew connects to your home’s water supply and begins the cleaning process before any sealing discussion takes place. We pre-treat the concrete with a solution designed to break down the organic mildew and buildup embedded in the surface. From there, we run our high-pressure rotating surface cleaners across the driveway. These machines are built specifically for flat concrete surfaces and do a more thorough job than a standard pressure wand. They remove mold, mildew, dirt, and algae from the surface and pores of the concrete. If oil is present and you’ve requested treatment, we apply a degreaser to address it. Oil results vary, and we don’t guarantee a 100% removal rate. Rust and stain removals are a separate service and are not part of the standard cleaning scope. Once the cleaning pass is complete, we post-rinse the entire surface to clear loosened debris and leave the concrete ready for sealing.
After the driveway is cleaned and you’ve confirmed the sealing add-on, we apply the Sherwin-Williams water-based sealer to the surface. The result is a clear protective coating that doesn’t dramatically change the appearance of the concrete, plus a water-beading effect that gives you visual confirmation that the protection is in place. The sealer is built to protect the surface for up to two years. We work from the transcript to determine what this product does and how it behaves, and we won’t tell you anything about cure time, number of coats, or application method unless we’ve confirmed it directly with you during quoting.
We close out every job the same way. We take after photos of the completed driveway, compare them against the before photos we took at the start, and walk the property to confirm the work meets expectations. When you’re home, we do that walkthrough with you. The job isn’t finished from our side until you’re satisfied. That’s not marketing language. It’s the actual practice our crew follows before they load up the trailer and leave your property.
We want homeowners to enter this service with realistic expectations, not optimistic ones. So here’s what’s real: this service does not include a written warranty or guarantee. There is no document you’ll receive that guarantees the sealer will last exactly two years regardless of conditions, usage, or surface variables. What we can tell you is that the Sherwin-Williams sealer is designed to protect for up to 2 years, and the results we consistently see support that for well-maintained concrete driveways in this region.
What we stand behind is the quality of the work itself. We confirm your satisfaction before we consider any job complete. If something looks off, the walkthrough at the end of the job is the time to say so, and we’ll address it before we leave. Our closeout process is built around accountability, not around getting signatures and moving to the next job. The before-and-after documentation we take at every appointment is part of that. It gives you a clear visual record of what the driveway looked like coming in and what it looks like going out.
The approval-first process for sealing is also part of this commitment to transparency. You will never be charged for sealing that you didn’t agree to. The bid is presented, you decide, and then the work happens. That’s the process, and it doesn’t change based on job size or how busy our schedule is.
No. Concrete sealing is an additional service that must be approved separately. Devins Powerwash only applies the sealer after the homeowner accepts the bid for that add-on.
The sealer is applied after the driveway has been cleaned, and it is completed on the same day. This makes sealing a convenient way to protect the driveway right after the cleaning is finished.
The Sherwin-Williams water-based sealer used by Devins Powerwash protects the driveway for up to two years. The final lifespan may vary based on real-world exposure, but the “up to two years” protection is what we stand behind from the product.
The sealer leaves a clear coat finish and creates a visible beading effect on the surface. Homeowners can expect water-repellent results without a painted-over appearance.
Cleveland driveways face recurring moisture, winter weather, freeze-season conditions, and deicing salts throughout the year. All of those factors make surface protection more relevant for homeowners in this market. Concrete sealing helps protect the driveway after cleaning, which is why it works well as a same-day add-on service.
Devins Powerwash uses a degreaser to remove as much oil as possible, but oil is never guaranteed to come out 100%. This is explained clearly before the job starts, so homeowners understand that stain results can vary.
No. Rust and stain removals are separate services and are not included in the standard driveway cleaning scope or the sealing add-on.
Yes. Because this is an exterior service tied to driveway conditions, scheduling can be affected by seasonal weather and surface conditions. Same-day sealing is convenient when conditions are right, but exterior work still depends on appropriate conditions being in place.
No. This page covers concrete driveway sealing only. Asphalt driveway sealing is not a service we offer.
Devins Powerwash reviews the driveway using satellite imagery and quotes the work based on the size and scope of the surface. Sealing is then offered as an optional add-on that must be approved before it is performed.
If your driveway is due for a cleaning or you’ve already had it cleaned recently and want to protect that result before another Cleveland winter works its way into the concrete, now is the right time to reach out. Devins Powerwash handles driveway cleaning and concrete sealing in a single appointment, using a Sherwin-Williams water-based sealer that protects the surface for up to 2 years, with a clear-coat finish and a water-beading effect you can see. Call us today at 440-429-1282, or request your quote online using the form. We serve Cleveland and the surrounding communities, and we’re happy to walk you through the process before you commit.
